Hydraulic Rod Seals Suppliers in Abu Dhabi, O Ring Seals, Rubber Seals

PLASTIC BALLS

Our Brochure

View our new brochure for an easy to read guide on all the products we offer.

PLASTIC BALLS

Plastic balls are manufactured from standard and specially polymer resins in size from 3/32″ – (2.381 mm) to 5″ -(127 mm). Balls above 1″ – (25.4 mm) are manufactured from extruded rod.
Plastic balls are a cost-effective substitute for metallic balls in low load bearings. They are also used as agitators in aerosol spray cans, lightweight check valves, medical diagnostics and a wide variety of other applications.
Tolerances to +/-0.0005″ (+-0.0125 mm) are possible for certain materials such as nylon and acetal. Surfaces can be tailored from rough to highly polished finishes.
PROPERTIES ACETAL POLYAMIDE POLYETHYLENE LOW DENSITY POLYETHYLENE HIGH DENSITY PTFE
FLUROCARSON
PHYSICAL
SPECIFIC GRAVITY 1.42 1.13-1.15 0.910-0.925 0.941-0.965 2.14-2.20
WATER ABSORPTION 24HR (1/8 IN: THICK SPECIMEN)^ SATURATION 0.25-0.40 500 (90ML) 1.0-1.3
8.5
<0.01 <0.01 <0.01
DIELECTRIC STRENGTH (1/8 IN:
THICK SPECIMEN) SHORT TIME V./MIL
500 (90ML) 600b 450-1000 450-500 480
MECHANICAL
TENSILE STRENGTH AT BREAK,PSI 12.000b11.000c 600-2300 3100-5500 2000-5000
ELONGATION AT BREAK,% 25-75 60b, 300c 90-800 20-130 200-400
TENSILE YIELD STRENGTH,PSI 95000-12.000 8000b , 6500° 800-1200 3000-4000
COMPRESSIVE STRENGTH (RUPTURE OR YIELD) PSI 18.000(5)10% 15.0008 (YLD.) 2700-3600 1700
FLEXURAL STRENGTH (RUPTURE OR YIELD) PSI 14.000 17.000s, 6100c
TENSILE MODULUS 103 PSI 520 14-38 60-180 58-80
COPRESSIVE MODULUS 103 PSI 670 60
73°F
FLEXURAL MODULUS 103 PSI 200°F 250°F300°F
380-430 420b , 185° 8-60 100-260 80
IZOD IMPACT. FT-LB/.I.OF NOTCH (1/8-IN.THICK SPECIMEN) 1.3-2.3 0.8-1.08, 2.1° NO BREAK 0.5-20 3
ROCKWELL
HARDNESS SH0RE
M94 R1208 M83b D40-51 D60-70 D-50-55
THERMAL
COEF.OF LINER THERMAL EXPANSION 106IN./IN°C 100 80 100-2220 110-130
DEFLECTION TEMPERATURE ,,?ncl 264PSI
FLEXURAL LOAD. °F
255 167b 90-105 110-130
66PSI 338 474b 100-121 140-190 250
THERMAL CONDUCTIVITY 10-CAL.-CM/SEC-CM2-°C 5.5 5.8 8 11-12 6.0
SPHERICITY TOLERANCE
GRADE INCHES MM INCHES MM SURFACE
o* 0.0005 0.0125 ±0.0005 0.0125 POLISHED
1 0.0005 0.0125 +0.001 0.025 POLISHED
II 0.001 0.025 ±0.002 0.050 UNPOLISHED
III 0.005 0.125 ±0.005 0.125 UNPOLISHED
Plastic Balls Manufacture And suppliers in Dubai,UAE

APPLICATIONS

Scroll to Top